Seamless 45mil EPDM Rubber Roofing Kit | Black

$415.25$3,112.00

Roofing Kit Includes:

45mil EPDM rubber

Gallon Pails of Latex Bonding Adhesive

5ft Termination Bars

$415.25

16 in stock

SKU: EPDM BLACK RUBBER ROOF KIT Category:

Description

First Rate Materials – 45Mil Seamless Rubber Roofing Kits 

Roofing Kit Includes:

45mil EPDM rubber

 Gallon Pails of Latex Bonding Adhesive

 5ft Termination Bars

 

Depending on size of rubber will depend on how many pails and bars

How to Apply Roofing Kit:

  1. Clean the roof surface of all debris and nails. Re-fasten any loose roof boards.
  2. Fill any gaps larger than 3/8” inch with wooden strips. The EPDM cannot span gaps of more than 3/8″ without risk of possible adhesion issues.
  3. Start at the bottom of the roof and roll out the EPDM from one side of the roof to the other and let it sit for 10-15 minutes. Fold bottom half of the membrane onto the top half of the in place membrane.
  4. Apply the bonding adhesive to the exposed roof deck and NOT to the EPDM membrane as the adhesive is to be applied as a one surface WET LAMINATE using a notched trowel to spread the adhesive in a pattern over the decking. Slowly fold the EPDM roofing membrane back into place while the adhesive is tacky and moist, and NOT still totally wet. This takes 10 to 15 minutes normally depending on your weather conditions. Please be aware NOT to lay the EPDM into WET adhesive but damp and tacky.  To ensure adhesive transfer and a good bond, use a stiff bristled push broom and force the membrane into contact with the adhesive on the roof deck. Repeat the process on the other half of the EPDM membrane

NOTE: MUST BEABLE TO TAKE OFF TRUCK>>NO LIFT GATE